Use Your Pen Drive as Ram

Yes with some modified settings you can use your pen drive as a RAM

1) Connect your pen drive to your PC [pen drive should be at least 1 GB or if you having 4 GB then its better]
2) Allow PC what he is supposed to do,let system to detect pen drive.
3) After your PC finished with its detection work,you have to do some little
4) Right click on the My Computer and select the properties
5) Goto advanced and then performance setting then advanced then
6) Select pen drive and click on custom size " Check the value of space available "
7) Enter the same in the Initial and the Max columns " You just used the memory of the PenDrive as a Virtual Memory "
8) Now restart your pc and enjoy your fast and super system

Thanks to : Hale

Share internet connection via bluetooth

1. Please recognize your two computers as usual.


(Start Menu / Config Panel / Network and Internet Connections / Bluetooth )

Only one computer needs to be added, the other is recognized and added automatically.


2. This is done on both computers and the host first.

Go to Start Menu / Config Panel / Network Connections
Click on Create a home network or corporate network light and follow the prompts. Once done, you share your files and your printer but not your Internet connection.

3. On the host computer:

Go to Start / Run
Type CMD
Type ipconfig / all

Parallel to AC, go to:
Start Menu / Config Panel / Network Connections
Then right-click on Network Connection properties bluetooth then click on Internet Protocol (TCP / IP) and properties.

Check Use the following IP address and put the one IP address as in ethernet card bluetooth network connection.

In use the following DNS server addresses that are being shown under 'PPP Map Nine' That's for me but you ca depends on the principle used for your Internet connection, or looking for servers there are marked DNS, there are 2, they are good then add the above. You turn the whole and that's it for the host.

4. You do the same in regard to the second computer except that you must add a bridge to the right function. It is in the Advanced tab, where you have set the ip / dns. And gateway is the ip of the host computer. But for the IP address change the last two values that you want.

Remember to check 'allow other network users to connect via the Internet from this computer' in the properties of your Internet connection.

thanks to : fanchon